-->

1. Download Demy Port Devices Driver
2. Download Demy Port Devices Driver Updater

Provides support for NI data acquisition and signal conditioning devices. NI-VISA Provides support for Ethernet, GPIB, serial, USB, and other types of instruments. In a driver pair, one driver handles general tasks that are common to a whole collection of devices, while the other driver handles tasks that are specific to an individual device. The drivers that handle device-specific tasks go by a variety of names, including miniport driver, miniclass driver, and minidriver.

Note

Please use the PnPUtil tool instead of DevCon.

DevCon (Devcon.exe), the Device Console, is a command-line tool that displays detailed information about devices on computers running Windows. You can use DevCon to enable, disable, install, configure, and remove devices.

DevCon runs on Microsoft Windows 2000 and later versions of Windows.

This section includes:

Download Demy Port Devices Driver

What you can do with DevCon

Windows driver developers and testers can use DevCon to verify that a driver is installed and configured correctly, including the proper INF files, driver stack, driver files, and driver package. You can also use the DevCon commands (enable, disable, install, start, stop, and continue) in scripts to test the driver.

DevCon is a command-line tool that performs device management functions on local computers and remote computers.

Note To run DevCon commands on a remote computer, the Group Policy setting must allow the Plug and Play service to run on the remote computer. On computers that run Windows Vista and Windows 7, the Group Policy disables remote access to the service by default. On computers that run Windows 8 and later operating systems, the remote access is unavailable.

Devcon features include:

• Display driver and device info DevCon can display the following properties of drivers and devices on local computers, and remote computers (running Windows XP and earlier):

  • Hardware IDs, compatible IDs, and device instance IDs. These identifiers are described in detail in Device Identification Strings.
  • The devices in a device setup class
  • INF files and device driver files
  • Details of driver packages
  • Hardware resources
  • Device status
  • Expected driver stack
  • Third-party driver packages in the driver store

• Search for devices DevCon can search for devices on a local or remote computer by hardware ID, device instance ID, or device setup class.

• Change device settings DevCon can change the status or configuration of Plug and Play (PnP) devices on the local computer in the following ways:

  • Enable a device
  • Disable a device
  • Update drivers (interactive and noninteractive)
  • Install a device (create a devnode and install software)
  • Remove a device from the device tree and delete its device stack
  • Rescan for Plug and Play devices
  • Add, delete, and reorder the hardware IDs of root-enumerated devices
  • Change the upper and lower filter drivers for a device setup class
  • Add and delete third-party driver packages from the driver store

• Restart the device or computer DevCon can restart a local device, reboot the local system on demand, or reboot the local system if required for another DevCon operation.

DevCon source code

The DevCon source code is also available so that you can examine the methods that DevCon uses to retrieve and change setup and configuration data. DevCon illustrates the use of general setup functions, device installation functions, and PnP Configuration Manager functions. The source code for the Device Console (DevCon) Tool is available in the Windows driver samples repository on GitHub.

Related topics

Software Downloads

Download Demy Port Devices Driver Updater

Free Software, Upgrades, and Maintenance Releases:

SOFTWARE UPDATE NOTIFICATION: No more hunting for software updates! Sign up for our software update e-mail notification service to find out when updates to our most popular software packages are available.

• DirectSoft
  Visit Host Engineering's website for new product information and software development kits.
• Dymo Labelers
  Visit the Dymo support website for the most current firmware, software, and drivers
• Ethernet SDK
  Visit Host Engineering's website for new product information and software development kits.
• SureServo
• SureStep
• Think & Do
  Visit the Phoenix Contact website for a complete list of Think & Do application notes and product information.
• WEG AC Drives and Soft Starters: Programming software and documentation for WEG CFW100, CFW300 and SSW07 products

Drivers:

• EA-MG-PGM-CBL drivers
  Drivers for the EA-MG-PGM-CBL USB-to-serial cable (Windows 2000 SP4, Windows XP SP2, and Windows Vista(32/64 bit), Windows 7 (32/64 bit), Windows 8 and 8.1 (32/64 bit), Windows 10)
• Industrial Monitors
• USB-485M serial converter drivers
  Drivers for serial converter USB-485M for Windows XP/7/8/8.1/10 (32 bit and 64 bit)

Tools and Utilities:

• CTRIO Workbench Tool
  The CTRIO Workbench Tool allows you to configure our CTRIO (High Speed Counter I/O) modules. CTRIO Workbench has utilities to configure the CTRIO modules, verify module I/O mapping and upgrade the CTRIO OS image.

• DNLoader
  DNLoader is a free utility that allows you to upload and download PLC programs without the use of DirectSOFT. Available from the Host Engineering web site.

• ERM Workbench Tool
  The ERM Workbench Tool allows you to configure our ERM (Ethernet Remote I/O)modules. ERM Workbench has utilities to configure the ERM modules, verify module I/O mapping and upgrade the ERM OS image.

• MDM-TEL Configuration Wizard
  Version 2.08
  View End User License Agreement

• Modbus TCP master program
  For use in troubleshooting Modbus TCP connections to Modbus TCP slave devices.

• NetEdit Tool
  The NetEdit Tool allows you to configure our ethernet modules.

• NITRA Pneumatics Support Resources
  NITRA Pneumatics configuration software and help files

• Radio Modem Utilities
  These utilities are included on the CD that is received in the package with the Cirronet Products. For help in using these products, please go to the documentation section of our web site and download the user manuals.

  • CR-HN04/50x Serial Radio modems tools
    • HNWIZARD: This Configuration Wizard is located on the CR-HN04/50x software and documentation CD included in the CR-HN package
  • CR-SEAP-x Spread Spectrum Ethernet Access Point tools
    • IPHUNTER: The CR-SEAP CD has device detection and IP setting utility named IP Hunter. This utility will detect all Cirronet Ethernet devices on the local network, even those with no IP address.
    • SNAPCom:SNAPCom is a simple TCP/UDP utility program to help familiarize the user with the CR-SEAP and its operation. SNAPCom can be executed off the CD or copied onto a PC. There is no need to install the program. SNAPCom is not a configuration utility and assumes the CR-SEAP has previously been configured using IP Hunter, WinSNAP and/or a telnet session.
    • Winsnap: WinSNAP will automatically find the appropriate serial port and configure the serial port settings for you. The software will inform you of its progress and any problems that arise.
    • WinSEM: The WinSEM program can be used to set up the CR-SEB through the Console port.
  • CR-SEBx and CR-SEH Ethernet Radio Modems tools
    • IPHUNTER: The CR-SEAP CD has device detection and IP setting utility named IP Hunter. This utility will detect all Cirronet Ethernet devices on the local network, even those with no IP address.
    • WinSEM: The WinSEM program can be used to set up the CR-SEB through the Console port.

• Socomec Easy Config Utility for Diris meters
  This Configurator utility enables quick and easy remote device configuration for DIRIS A10 and A20 multifunction meters. Minimum requirements:

  • Windows XP Service pack 3, VISTA or Windows 7 / 8 / 10
  • 1.0 GHz, 512 MB
  • 500 MB on hard disk
  • Resolution screen: 1024x768
  • Framework .net version 3.5 SP1 or higher: Free download of the Microsoft site under www.microsoft.com/net

• SR55 IPConfig Tool
  The IPConfig Tool allows you to configure the IP addresses on SR55-CM-MODTCP and SR55-CM-ENETIP soft starter communication modules.

• Stratus A/C BTU/H Calculator
  A free utility to calculate required BTU/H for Stratus Enclosure Air Conditioners.

• T1K-MODBUS Setup Tool
  The T1K-MODBUS Setup Tool allows user configuration of extended timing parameters including Stop Bit(s), Parity, On Delay Time, Off Delay Time, and Communication Time-out that cannot be altered from the hardware dip switches. This software is Windows 95/98/NT/2K compatible and requires an RS-232 serial cable (our p/n D2-DSCBL is compatible) to be connected from a PC to the T1K-MODBUS auxiliary RJ11 serial port.

• Trumeter ADM Graphic Panel Meter Configurator Utility
  Configurator utility allows you to program custom configurations onto your ADM. Minimum requirements: A PC or laptop running Windows XP, Vista, 7, 8, or 10 operating system, 32- or 64-bit, Microsoft .NET Framework. (If you don’t have this, you can download it from www.microsoft.com/net).

• Ultrasonic Level Sensor WEBCAL software
  WEBCAL software is used for configuration and firmware updates of ultrasonic level sensors.

Configuration Files:

• D0-DEVNETS EDS File
  DeviceNet Electronic Data Sheet (EDS) for D0-DEVNETS is often required for proper configuration through a DeviceNet Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

• F2-DEVNETS-1 EDS and Icon File
  DeviceNet Electronic Data Sheet (EDS) for F2-DEVNETS is often required for proper configuration through a DeviceNet Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file. An icon (.ico) file is also included for your convenience.

• GS4-CM-ENETIP EDS File
  Ethernet/IP Electronic Data Sheet (EDS) for GS4-CM-ENETIP is often required for proper configuration through an Ethernet/IP Master and its configuration software.

• GS20A-CM-ENETIP EDS File
  Ethernet/IP Electronic Data Sheet (EDS) for GS20A-CM-ENETIP is often required for proper configuration through an Ethernet/IP Master and its configuration software.

• GS20(X) PID Configuration Tool
  A visualization and cross reference of the PID control parameters for GS20(X) drives.

• H0-PSCM GSD File
  Profibus GSD file for H0-PSCM is often required for proper configuration through a Profibus Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

• H2-PBC GSD File
  Profibus GSD file for H2-PBC is often required for proper configuration through a Profibus Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

• L5KPreDefine_Template
  L5KPreDefine_Template.txt is a template file that contains all of the predefined data types in RSLogix5000. This file is used in conjunction with the C-more Programming Software to import Allen Bradley RSLogix5000 predefined data types into the C-more Tag Name Database. Refer to Application Note 'C-more Importing AB Logix PreDefined Data Types' for instructions on using this file with the C-more Programming Software.

• Nitra Pneumatics EDS files
  Ethernet/IP and CMV Electronic Data Sheet (EDS) files are available. These files are provided in 'zip' format. Save to your computer and use the unzip utility of your choice to extract the EDS file.

• SR55-CM-ENETIP EDS File
  Ethernet/IP Electronic Data Sheet (EDS) for SR55-CM-ENETIP is often required for proper configuration through an Ethernet/IP Master and its configuration software.

• T1H-PBC GSD File
  Profibus GSD file for T1H-PBC is often required for proper configuration through a Profibus Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.

• T1K-DEVNETS EDS File
  DeviceNet Electronic Data Sheet (EDS) for T1K-DEVNETS is often required for proper configuration through a DeviceNet Master and its configuration software. This file is provided in 'zip' format. Save it to your computer and use the unzip utility of your choice to extract the EDS file.